Ford Base Engine - ATK High Performance Engine https://atkhp.com/product-category/ford-crate/ford-base/ Building Performance Engines Since 1936 Wed, 19 Jun 2024 21:06:25 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.5 https://atkhp.com/wp-content/uploads/2022/12/cropped-ATKHP300x300-32x32.png Ford Base Engine - ATK High Performance Engine https://atkhp.com/product-category/ford-crate/ford-base/ 32 32 ATK HP81 Ford 408 Stroker Base Engine 480HP https://atkhp.com/product/atk-hp81-ford-408-stroker-base-engine-480hp/ https://atkhp.com/product/atk-hp81-ford-408-stroker-base-engine-480hp/#respond Wed, 24 May 2023 14:33:56 +0000 https://atkhp.com/?post_type=product&p=4687 Engine Specifications: • HP: 480 • TQ: 500 • Block: Seasoned OE roller block 1993-1997 • Bore/Stroke: 4.040 x 4.000 • Displacement: 408 • Crankshaft: Scat 4340 forged internal balance • Rods: Scat 4340 forged H beam with ARP 8740 bolts • Pistons: Forged 10.1 compression • Rings: Moly • Camshaft: Hyd. Roller • Cam […]

The post ATK HP81 Ford 408 Stroker Base Engine 480HP appeared first on ATK High Performance Engine.

]]>
Engine Specifications:
• HP: 480
• TQ: 500
• Block: Seasoned OE roller block 1993-1997
• Bore/Stroke: 4.040 x 4.000
• Displacement: 408
• Crankshaft: Scat 4340 forged internal balance
• Rods: Scat 4340 forged H beam with ARP 8740 bolts
• Pistons: Forged 10.1 compression
• Rings: Moly
• Camshaft: Hyd. Roller
• Cam Specs: 235/238 @50 .573in/.582ex 112LSA
• Timing Chain: Double roller
• Cylinder Heads: Dart aluminum 58cc/195cc 2.02/1.60
• Rocker Arms: Aluminum 1.6 roller rockers
• Oil Pan: Moroso front sump 7qt street/strip pan
• Oil Pump: Melling high volume

Recommended Components:
• Balancer: Internal balance
• Flexplate/Flywheel: Internal balance
• Intake Manifold: Edelbrock performer RPM air gap dual plane #7581
• Distributor: Pro billet (with upgraded melonite or steel gear)
• Water Pump: Per application
• Carburetor: Quick Fuel 780CFM vacuum secondary’s electric choke #HR-780
• Fuel Pump: Holley mechanical 110GPH #12-289-11
• Spark Plugs: Autolite #3923
• Spark Plug Wires: 8mm

Engine Info:
• Oil: Conventional / Non Synthetic 10W30
• Oil Filter: Wix or K&N per application
• Timing: 34-36 Degrees
• Spark Plug Gap: .035”
• Firing Order: 13726548
• Octane: 91+
• Stall Converter: 2500+
• Exhaust: 1 3/4 Headers

Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. ATK reserves the right to substitute parts used in engines if necessary.

The post ATK HP81 Ford 408 Stroker Base Engine 480HP appeared first on ATK High Performance Engine.

]]>
https://atkhp.com/product/atk-hp81-ford-408-stroker-base-engine-480hp/feed/ 0
ATK HP19 Ford 502 Base Engine 545HP https://atkhp.com/product/atk-hp19-ford-502-base-engine-545hp/ https://atkhp.com/product/atk-hp19-ford-502-base-engine-545hp/#respond Wed, 24 May 2023 14:29:14 +0000 https://atkhp.com/?post_type=product&p=4685 Engine Specifications: • HP: 545 • TQ: 595 • Block: Seasoned OE block 1987-1992 • Bore/Stroke: 4.400 x 4.150 • Displacement: 502 • Crankshaft: Scat nodular iron internal balance • Rods: Scat 4340 forged I beam with ARP 8740 bolts • Pistons: Hypereutectic 9.5.1 compression • Rings: Moly • Camshaft: Hyd. flat tappet • Cam […]

The post ATK HP19 Ford 502 Base Engine 545HP appeared first on ATK High Performance Engine.

]]>
Engine Specifications:
• HP: 545
• TQ: 595
• Block: Seasoned OE block 1987-1992
• Bore/Stroke: 4.400 x 4.150
• Displacement: 502
• Crankshaft: Scat nodular iron internal balance
• Rods: Scat 4340 forged I beam with ARP 8740 bolts
• Pistons: Hypereutectic 9.5.1 compression
• Rings: Moly
• Camshaft: Hyd. flat tappet
• Cam Specs: 253/253 @50 .585in/.585ex 110LSA
• Timing Chain: Double roller
• Cylinder Heads: Edelbrock performer RPM aluminum 75cc/292cc 2.190/1.760
• Rocker Arms: Stainless steel 1.73 ratio
• Oil Pan: Front sump
• Oil Pump: Melling high volume

Recommended Components:
• Balancer: PowerBond internal balance #PB1210-N
• Flexplate/Flywheel: Pioneer internal balance #FRA-207
• Intake Manifold: Edelbrock performer RPM dual plane #7166
• Distributor: Pro billet RTR (Iron Gear)
• Water Pump: Per application
• Carburetor: Quick Fuel 780CFM vacuum secondary’s electric choke #HR-780
• Fuel Pump: Holley mechanical 110GPH #12-460-11
• Spark Plugs: Autolite #3923
• Spark Plug Wires: 8mm

Engine Info:
• Oil: Conventional / Non Synthetic 10W30 with Comp Cam zinc additive #159 for first 3000 miles
• Oil Filter: Wix or K&N per application
• Timing: 34-36 Degrees
• Spark Plug Gap: .035”
• Firing Order: 15426378
• Octane: 91+
• Stall Converter: 2200-2500
• Exhaust: 1 ¾-2” Headers

Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. ATK reserves the right to substitute parts used in engines if necessary.

The post ATK HP19 Ford 502 Base Engine 545HP appeared first on ATK High Performance Engine.

]]>
https://atkhp.com/product/atk-hp19-ford-502-base-engine-545hp/feed/ 0
ATK HP102 Ford 502 Base Engine 515HP https://atkhp.com/product/atk-hp102-ford-502-base-engine-515hp/ https://atkhp.com/product/atk-hp102-ford-502-base-engine-515hp/#respond Wed, 24 May 2023 14:28:43 +0000 https://atkhp.com/?post_type=product&p=4683 Engine Specifications: • HP: 515 • TQ: 585 • Block: Seasoned OE block 1987-1992 • Bore/Stroke: 4.400 x 4.150 • Displacement: 502 • Crankshaft: Scat nodular iron internal balance • Rods: Scat 4340 forged I beam with ARP 8740 bolts • Pistons: Hypereutectic 9.5.1 compression • Rings: Moly • Camshaft: Hyd. flat tappet • Cam […]

The post ATK HP102 Ford 502 Base Engine 515HP appeared first on ATK High Performance Engine.

]]>
Engine Specifications:
• HP: 515
• TQ: 585
• Block: Seasoned OE block 1987-1992
• Bore/Stroke: 4.400 x 4.150
• Displacement: 502
• Crankshaft: Scat nodular iron internal balance
• Rods: Scat 4340 forged I beam with ARP 8740 bolts
• Pistons: Hypereutectic 9.5.1 compression
• Rings: Moly
• Camshaft: Hyd. flat tappet
• Cam Specs: 225/235 @50 .536in/.541ex 112LSA
• Timing Chain: Double roller
• Cylinder Heads: Edelbrock performer RPM aluminum 75cc/292cc 2.190/1.760
• Rocker Arms: Stainless steel 1.73 ratio
• Oil Pan: Front sump
• Oil Pump: Melling high volume

Recommended Components:
• Balancer: PowerBond internal balance #PB1210-N
• Flexplate/Flywheel: Pioneer internal balance #FRA-207
• Intake Manifold: Edelbrock performer RPM dual plane #7166
• Distributor: Pro billet RTR (Iron Gear)
• Water Pump: Per application
• Carburetor: Quick Fuel 780CFM vacuum secondary’s electric choke #HR-780
• Fuel Pump: Holley mechanical 110GPH #12-460-11
• Spark Plugs: Autolite #3923
• Spark Plug Wires: 8mm

Engine Info:
• Oil: Conventional / Non Synthetic 10W30 with Comp Cam zinc additive #159 for first 3000 miles
• Oil Filter: Wix or K&N per application
• Timing: 34-36 Degrees
• Spark Plug Gap: .035”
• Firing Order: 15426378
• Octane: 91+
• Stall Converter: 2200-2500
• Exhaust: 1 ¾-2” Headers

Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. ATK reserves the right to substitute parts used in engines if necessary.

The post ATK HP102 Ford 502 Base Engine 515HP appeared first on ATK High Performance Engine.

]]>
https://atkhp.com/product/atk-hp102-ford-502-base-engine-515hp/feed/ 0
ATK HP100 Ford 347 Stroker Base Engine 450HP https://atkhp.com/product/atk-hp100-ford-347-stroker-base-engine-450hp/ https://atkhp.com/product/atk-hp100-ford-347-stroker-base-engine-450hp/#respond Wed, 24 May 2023 14:16:54 +0000 https://atkhp.com/?post_type=product&p=4682 Engine Specifications: • HP: 450 • TQ: 450 • Block: Seasoned OE roller block • Bore/Stroke: 4.040 x 3.400 • Displacement: 347 • Crankshaft: Scat nodular iron external balance 28oz • Rods: Scat 4340 forged I beam with ARP 8740 bolts • Pistons: Forged 10:1 compression • Rings: Moly • Camshaft: Hyd. Roller • Cam […]

The post ATK HP100 Ford 347 Stroker Base Engine 450HP appeared first on ATK High Performance Engine.

]]>
Engine Specifications:
• HP: 450
• TQ: 450
• Block: Seasoned OE roller block
• Bore/Stroke: 4.040 x 3.400
• Displacement: 347
• Crankshaft: Scat nodular iron external balance 28oz
• Rods: Scat 4340 forged I beam with ARP 8740 bolts
• Pistons: Forged 10:1 compression
• Rings: Moly
• Camshaft: Hyd. Roller
• Cam Specs: 231/235 @50 .544in/.565ex 112LSA
• Timing Chain: Double roller
• Cylinder Heads: Dart aluminum 58cc/195cc 2.02/1.60
• Rocker Arms: Aluminum 1.6 roller rockers
• Oil Pan: Front sump
• Oil Pump: Melling high volume
• Balancer: External balance 28oz (with Scat kit)
• Flexplate/Flywheel: External balance 28oz 164 tooth (with Scat kit)

Recommended Components:
• Intake Manifold: Edelbrock performer RPM air gap dual plane #7521
• Distributor: Pro billet RTR (with upgraded melonite or steel gear)
• Water Pump: Per application
• Carburetor: Quick Fuel 680CFM vacuum secondary’s electric choke #HR-680cfm
• Fuel Pump: Holley mechanical 110GPH #12-289-11
• Spark Plugs: Autolite #3923
• Spark Plug Wires: 8mm

Engine Info:
• Oil: Conventional / Non Synthetic 10W30
• Oil Filter: Wix or K&N per application
• Timing: 34-36 Degrees with vacuum port plugged on carburetor
• Spark Plug Gap: .035”
• Firing Order: 13726548
• Octane: 91+
• Stall Converter: 2400-2800
• Exhaust: 1 5/8 Headers

Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. ATK reserves the right to substitute parts used in engines if necessary.

The post ATK HP100 Ford 347 Stroker Base Engine 450HP appeared first on ATK High Performance Engine.

]]>
https://atkhp.com/product/atk-hp100-ford-347-stroker-base-engine-450hp/feed/ 0
ATK HP21 Ford 408 Stroker Base Engine 430HP https://atkhp.com/product/atk-hp21-ford-408-stroker-base-engine-430hp/ https://atkhp.com/product/atk-hp21-ford-408-stroker-base-engine-430hp/#respond Wed, 24 May 2023 14:13:35 +0000 https://atkhp.com/?post_type=product&p=4681 Engine Specifications: • HP: 430 • TQ: 500 • Block: Seasoned OE roller block 1993-1997 • Bore/Stroke: 4.040 x 4.000 • Displacement: 408 • Crankshaft: Scat nodular iron internal balance • Rods: Scat 4340 forged I beam with ARP 8740 bolts • Pistons: Forged 10.1 compression • Rings: Moly • Camshaft: Hyd. Roller • Cam […]

The post ATK HP21 Ford 408 Stroker Base Engine 430HP appeared first on ATK High Performance Engine.

]]>
Engine Specifications:
• HP: 430
• TQ: 500
• Block: Seasoned OE roller block 1993-1997
• Bore/Stroke: 4.040 x 4.000
• Displacement: 408
• Crankshaft: Scat nodular iron internal balance
• Rods: Scat 4340 forged I beam with ARP 8740 bolts
• Pistons: Forged 10.1 compression
• Rings: Moly
• Camshaft: Hyd. Roller
• Cam Specs: 220/224 @50 .512in/.512ex 112LSA
• Timing Chain: Double roller
• Cylinder Heads: Dart aluminum 58cc/170cc 2.02/1.60
• Rocker Arms: Aluminum 1.6 roller rockers
• Oil Pan: Front sump
• Oil Pump: Melling high volume

Recommended Components:
• Balancer: Internal balance
• Flexplate/Flywheel: Internal balance
• Intake Manifold: Edelbrock performer RPM dual plane #7181
• Distributor: Pro billet RTR (with upgraded melonite or steel gear)
• Water Pump: Per application
• Carburetor: Quick Fuel 780CFM vacuum secondary’s electric choke #HR-780
• Fuel Pump: Holley mechanical 110GPH #12-289-11
• Spark Plugs: Autolite #3923
• Spark Plug Wires: 8mm

Engine Info:
• Oil: Conventional / Non Synthetic 10W30
• Oil Filter: Wix or K&N per application
• Timing: 34-36 Degrees
• Spark Plug Gap: .035”
• Firing Order: 13726548
• Octane: 91+
• Stall Converter: 2200-2500
• Exhaust: 1 5/8 – 1 3/4 Headers

 

Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. ATK reserves the right to substitute parts used in engines if necessary.

The post ATK HP21 Ford 408 Stroker Base Engine 430HP appeared first on ATK High Performance Engine.

]]>
https://atkhp.com/product/atk-hp21-ford-408-stroker-base-engine-430hp/feed/ 0
ATK HP80 Ford 347 Stroker Base Engine 410HP with Front Sump Pan https://atkhp.com/product/atk-hp80-ford-347-stroker-base-engine-410hp-with-front-sump-oil-pan/ https://atkhp.com/product/atk-hp80-ford-347-stroker-base-engine-410hp-with-front-sump-oil-pan/#respond Wed, 24 May 2023 14:08:07 +0000 https://atkhp.com/?post_type=product&p=4680 Engine Specifications: • HP: 415 • TQ: 430 • Block: Seasoned OE Roller Block 1987-1995 • Bore/Stroke: 4.040 x 3.400 • Displacement: 347CI • Crankshaft: Scat nodular iron external balance 28oz • Rods: Scat 4340 forged I beam with ARP 8740 bolts • Pistons: Forged 10:1 compression • Rings: Moly • Camshaft: Hyd. Roller • […]

The post ATK HP80 Ford 347 Stroker Base Engine 410HP with Front Sump Pan appeared first on ATK High Performance Engine.

]]>
Engine Specifications:
• HP: 415
• TQ: 430
• Block: Seasoned OE Roller Block 1987-1995
• Bore/Stroke: 4.040 x 3.400
• Displacement: 347CI
• Crankshaft: Scat nodular iron external balance 28oz
• Rods: Scat 4340 forged I beam with ARP 8740 bolts
• Pistons: Forged 10:1 compression
• Rings: Moly
• Camshaft: Hyd. Roller
• Cam Specs: 220/224 @50 .512in/.512ex 112LSA
• Timing Chain: Double roller
• Cylinder Heads: Dart aluminum 58cc/170cc 2.02/1.60
• Rocker Arms: Aluminum 1.6 roller rockers
• Oil Pan: Front sump
• Oil Pump: Melling high volume
• Balancer: External balance 28oz (with Scat kit)
• Flexplate/Flywheel: External balance 28oz 164 tooth (with Scat kit)

Recommended Components:
• Intake Manifold: Edelbrock performer RPM #7121
• Carburetor: Quick Fuel 680CFM vacuum secondary’s electric choke #HR-680cfm
• Fuel Pump: Holley Mechanical 110GPH #12-289-11 or Factory Electric if installed in 1987-1995 Mustang
• Distributor: Pro Billet RTR (with upgraded melonite or steel gear)
• Spark Plugs: Autolite #3923
• Spark Plug Wires: 8mm
• Water Pump: Per application

Engine Info:
• Oil: Conventional / Non Synthetic 10W30
• Oil Filter: Wix or K&N
• Timing: 34-36 Degrees
• Spark Plug Gap: .035”
• Firing Order: 13726548
• Octane: 91+
• Stall Converter: 2400-2800
• Exhaust: 1 5/8

 

Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. . ATK reserves the right to substitute parts used in engines if necessary.

The post ATK HP80 Ford 347 Stroker Base Engine 410HP with Front Sump Pan appeared first on ATK High Performance Engine.

]]>
https://atkhp.com/product/atk-hp80-ford-347-stroker-base-engine-410hp-with-front-sump-oil-pan/feed/ 0
ATK HP20 Ford 347 Stroker Base Engine 410HP with Fox Body Oil Pan https://atkhp.com/product/atk-hp20-ford-347-stroker-base-engine-410hp-with-fox-body-oil-pan/ https://atkhp.com/product/atk-hp20-ford-347-stroker-base-engine-410hp-with-fox-body-oil-pan/#respond Wed, 24 May 2023 14:06:28 +0000 https://atkhp.com/?post_type=product&p=4679 Engine Specifications: • HP: 415 • TQ: 430 • Block: Seasoned OE Roller Block 1987-1995 • Bore/Stroke: 4.040 x 3.400 • Displacement: 347CI • Crankshaft: Scat nodular iron external balance 28oz • Rods: Scat 4340 forged I beam with ARP 8740 bolts • Pistons: Forged 10:1 compression • Rings: Moly • Camshaft: Hyd. Roller • […]

The post ATK HP20 Ford 347 Stroker Base Engine 410HP with Fox Body Oil Pan appeared first on ATK High Performance Engine.

]]>
Engine Specifications:
• HP: 415
• TQ: 430
• Block: Seasoned OE Roller Block 1987-1995
• Bore/Stroke: 4.040 x 3.400
• Displacement: 347CI
• Crankshaft: Scat nodular iron external balance 28oz
• Rods: Scat 4340 forged I beam with ARP 8740 bolts
• Pistons: Forged 10:1 compression
• Rings: Moly
• Camshaft: Hyd. Roller
• Cam Specs: 220/224 @50 .512in/.512ex 112LSA
• Timing Chain: Double roller
• Cylinder Heads: Dart aluminum 58cc/170cc 2.02/1.60
• Rocker Arms: Aluminum 1.6 roller rockers
• Oil Pan: Fox Body (Mustang Dual Sump)
• Oil Pump: Melling high volume
• Balancer: External balance 28oz (with Scat kit)
• Flexplate/Flywheel: External balance 28oz 164 tooth (with Scat kit)

Recommended Components:
• Intake Manifold: Edelbrock performer RPM #7121
• Carburetor: Quick Fuel 680CFM vacuum secondary’s electric choke #HR-680cfm
• Fuel Pump: Holley Mechanical 110GPH #12-289-11 or Factory Electric if installed in 1987-1995 Mustang
• Distributor: Pro Billet RTR (with upgraded melonite or steel gear)
• Spark Plugs: Autolite #3923
• Spark Plug Wires: 8mm
• Water Pump: OE reverse rotation LH inlet

Engine Info:
• Oil: Conventional / Non Synthetic 10W30
• Oil Filter: Wix or K&N
• Timing: 34-36 Degrees
• Spark Plug Gap: .035”
• Firing Order: 13726548
• Octane: 91+
• Stall Converter: 2400-2800
• Exhaust: 1 5/8

 

Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. . ATK reserves the right to substitute parts used in engines if necessary.

The post ATK HP20 Ford 347 Stroker Base Engine 410HP with Fox Body Oil Pan appeared first on ATK High Performance Engine.

]]>
https://atkhp.com/product/atk-hp20-ford-347-stroker-base-engine-410hp-with-fox-body-oil-pan/feed/ 0
ATK HP11 Ford 351W Base Engine 385HP https://atkhp.com/product/atk-hp11-ford-351w-base-engine-385hp/ https://atkhp.com/product/atk-hp11-ford-351w-base-engine-385hp/#respond Wed, 24 May 2023 14:02:12 +0000 https://atkhp.com/?post_type=product&p=4677 Engine Specifications: • HP: 390 • TQ: 420 • Block: Seasoned OE roller block 1993-1997 • Bore/Stroke: 4.040 x 3.500 • Displacement: 351 • Crankshaft: OE 1 piece rear main seal 28oz balance • Rods: OE • Pistons: Hypereutectic 9.8:1 compression • Rings: Moly • Camshaft: Hyd. Roller • Cam Specs: 220/224 @50 .512in/.512ex 112LSA […]

The post ATK HP11 Ford 351W Base Engine 385HP appeared first on ATK High Performance Engine.

]]>
Engine Specifications:
• HP: 390
• TQ: 420
• Block: Seasoned OE roller block 1993-1997
• Bore/Stroke: 4.040 x 3.500
• Displacement: 351
• Crankshaft: OE 1 piece rear main seal 28oz balance
• Rods: OE
• Pistons: Hypereutectic 9.8:1 compression
• Rings: Moly
• Camshaft: Hyd. Roller
• Cam Specs: 220/224 @50 .512in/.512ex 112LSA
• Timing Chain: Double roller
• Cylinder Heads: Dart aluminum 58cc/170cc 2.02/1.60
• Rocker Arms: Aluminum 1.6 roller rockers
• Oil Pan: Front sump
• Oil Pump: Melling high volume

Recommended Components:
• Balancer: External balance 28oz
• Flexplate/Flywheel: External balance 28oz
• Intake Manifold: Weiand Stealth dual plane #8023
• Distributor: Pro billet RTR (with upgraded melonite or steel gear)
• Water Pump: Early RH inlet standard rotation
• Carburetor: Quick Fuel 680CFM vacuum secondary’s electric choke #HR-680cfm
• Fuel Pump: Holley mechanical 110GPH #12-289-11
• Spark Plugs: Autolite #3923
• Spark Plug Wires: 8mm

Engine Info:
• Oil: Conventional / Non Synthetic 10W30
• Oil Filter: Wix or K&N per application
• Timing: 34-36 Degrees with vacuum port plugged on carburetor
• Spark Plug Gap: .035”
• Firing Order: 13726548
• Octane: 91+
• Stall Converter: 2200-2500
• Exhaust: 1 5/8 Headers

 

Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. ATK reserves the right to substitute parts used in engines if necessary.

The post ATK HP11 Ford 351W Base Engine 385HP appeared first on ATK High Performance Engine.

]]>
https://atkhp.com/product/atk-hp11-ford-351w-base-engine-385hp/feed/ 0
ATK HP08 Ford 302 Base Engine 365HP Fox Body Oil Pan https://atkhp.com/product/atk-hp08-ford-302-base-engine-365hp/ https://atkhp.com/product/atk-hp08-ford-302-base-engine-365hp/#respond Wed, 24 May 2023 13:54:10 +0000 https://atkhp.com/?post_type=product&p=4676 Engine Specifications: • HP: 375 • TQ: 380 • Block: Seasoned OE Roller Block 1987-1995 • Bore/Stroke: 4.040 x 3.000 • Displacement: 302CI • Crankshaft: OE 1 piece seal external balance 50oz • Rods: OE • Pistons: Hypereutectic 9.5:1 compression • Rings: Moly • Camshaft: Hyd. Roller • Cam Specs: 220/224 @50 .512in/.512ex 112LSA • […]

The post ATK HP08 Ford 302 Base Engine 365HP Fox Body Oil Pan appeared first on ATK High Performance Engine.

]]>
Engine Specifications:
• HP: 375
• TQ: 380
• Block: Seasoned OE Roller Block 1987-1995
• Bore/Stroke: 4.040 x 3.000
• Displacement: 302CI
• Crankshaft: OE 1 piece seal external balance 50oz
• Rods: OE
• Pistons: Hypereutectic 9.5:1 compression
• Rings: Moly
• Camshaft: Hyd. Roller
• Cam Specs: 220/224 @50 .512in/.512ex 112LSA
• Timing Chain: Double roller
• Cylinder Heads: Dart aluminum 58cc/170cc 2.02/1.60
• Rocker Arms: Aluminum 1.6 roller rockers
• Oil Pan: Fox body dual sump
• Oil Pump: Melling high volume

Recommended Components:
• Balancer: External balance 50oz
• Flexplate/Flywheel: External balance 50oz
• Intake Manifold: Edelbrock performer RPM dual plane #7121
• Distributor: Pro billet RTR (with upgraded melonite or steel gear)
• Carburetor: Quick Fuel 680CFM vacuum secondary’s electric choke #HR-680cfm
• Fuel Pump: Holley Mechanical 110GPH #12-289-11
• Spark Plugs: Autolite #3923
• Spark Plug Wires: 8mm
• Water Pump: Early RH inlet standard rotation

Engine Info:
• Oil: Conventional / Non Synthetic 10W30
• Oil Filter: Wix or K&N
• Timing: 34-36 Degrees
• Spark Plug Gap: .035”
• Firing Order: 13726548
• Octane: 91+
• Stall Converter: 2400-2800
• Exhaust: 1 5/8

 

Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. . ATK reserves the right to substitute parts used in engines if necessary.

The post ATK HP08 Ford 302 Base Engine 365HP Fox Body Oil Pan appeared first on ATK High Performance Engine.

]]>
https://atkhp.com/product/atk-hp08-ford-302-base-engine-365hp/feed/ 0
ATK HP78 Ford 302 Base Engine 365HP https://atkhp.com/product/atk-hp78-ford-302-base-engine-365hp/ https://atkhp.com/product/atk-hp78-ford-302-base-engine-365hp/#respond Tue, 23 May 2023 21:15:13 +0000 https://atkhp.com/?post_type=product&p=4674 Engine Specifications: • HP: 375 • TQ: 380 • Block: Seasoned OE Roller Block 1987-1995 • Bore/Stroke: 4.040 x 3.000 • Displacement: 302CI • Crankshaft: OE 1 piece seal external balance 50oz • Rods: OE • Pistons: Hypereutectic 9.5:1 compression • Rings: Moly • Camshaft: Hyd. Roller • Cam Specs: 220/224 @50 .512in/.512ex 112LSA • […]

The post ATK HP78 Ford 302 Base Engine 365HP appeared first on ATK High Performance Engine.

]]>
Engine Specifications:
• HP: 375
• TQ: 380
• Block: Seasoned OE Roller Block 1987-1995
• Bore/Stroke: 4.040 x 3.000
• Displacement: 302CI
• Crankshaft: OE 1 piece seal external balance 50oz
• Rods: OE
• Pistons: Hypereutectic 9.5:1 compression
• Rings: Moly
• Camshaft: Hyd. Roller
• Cam Specs: 220/224 @50 .512in/.512ex 112LSA
• Timing Chain: Double roller
• Cylinder Heads: Dart aluminum 58cc/170cc 2.02/1.60
• Rocker Arms: Aluminum 1.6 roller rockers
• Oil Pan: Front sump
• Oil Pump: Melling high volume

Recommended Components:
• Balancer: External balance 50oz
• Flexplate/Flywheel: External balance 50oz
• Intake Manifold: Edelbrock performer RPM dual plane #7121
• Distributor: Pro billet RTR (with upgraded melonite or steel gear)
• Carburetor: Quick Fuel 680CFM vacuum secondary’s electric choke #HR-680cfm
• Fuel Pump: Holley Mechanical 110GPH #12-289-11
• Spark Plugs: Autolite #3923
• Spark Plug Wires: 8mm
• Water Pump: Early RH inlet standard rotation

Engine Info:
• Oil: Conventional / Non Synthetic 10W30
• Oil Filter: Wix or K&N
• Timing: 34-36 Degrees
• Spark Plug Gap: .035”
• Firing Order: 13726548
• Octane: 91+
• Stall Converter: 2400-2800
• Exhaust: 1 5/8

 

Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. . ATK reserves the right to substitute parts used in engines if necessary.

The post ATK HP78 Ford 302 Base Engine 365HP appeared first on ATK High Performance Engine.

]]>
https://atkhp.com/product/atk-hp78-ford-302-base-engine-365hp/feed/ 0