Recommended Components:
• Balancer: Internal balance
• Flexplate/Flywheel: Internal balance
• Head Gasket: .038” or per application

Engine Info:
• Oil: 10W30 Conventional / Non Synthetic for first 3000 miles
• Oil Filter: Wix or K&N per application

Disclaimer: The recommended components listed are ATK’s recommendations of parts to be used, applications vary and your build may need something different. Contact ATK for a recommendation if you’re not certain about a component to use. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. ATK reserves the right to substitute parts used in engines if necessary.

The post ATK SP45 Chevy 598 Short Block Flat Top Pistons appeared first on ATK High Performance Engine.

Recommended Components:
• Balancer: Internal balance
• Flexplate/Flywheel: Internal balance
• Head Gasket: .038” or per application

Engine Info:
• Oil: 10W30 Conventional / Non Synthetic for first 3000 miles
• Oil Filter: Wix or K&N per application

Disclaimer: The recommended components listed are ATK’s recommendations of parts to be used, applications vary and your build may need something different. Contact ATK for a recommendation if you’re not certain about a component to use. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. ATK reserves the right to substitute parts used in engines if necessary.

The post ATK SP44 Chevy 540CI Short Block -10cc Dome Pistons appeared first on ATK High Performance Engine.

Recommended Components:
• Balancer: Internal balance
• Flexplate/Flywheel: Internal balance
• Head Gasket: .038” or per application

Engine Info:
• Oil: 10W30 Non synthetic for first 3000 miles
• Oil Filter: Wix or K&N per application

Notes:
• No mechanical fuel pump provisions

Disclaimer: The recommended components listed are ATK’s recommendations of parts to be used, applications vary and your build may need something different. Contact ATK for a recommendation if you’re not certain about a component to use. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. ATK reserves the right to substitute parts used in engines if necessary.

The post ATK SP41-1P Chevy 489/496CI Stroker Short Block +20cc Dome Pistons 1pc Seal appeared first on ATK High Performance Engine.

Recommended Components:
• Balancer: Internal balance
• Flexplate/Flywheel: Internal balance
• Head Gasket: .038” or per application

Engine Info:
• Oil: 10W30 Non synthetic for first 3000 miles
• Oil Filter: Wix or K&N per application

Notes:
• No mechanical fuel pump provisions

Disclaimer: The recommended components listed are ATK’s recommendations of parts to be used, applications vary and your build may need something different. Contact ATK for a recommendation if you’re not certain about a component to use. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. . ATK reserves the right to substitute parts used in engines if necessary.

The post ATK SP98 Chevy 489/496CI Stroker Short Block +20cc Dome Pistons 1pc Seal appeared first on ATK High Performance Engine.

Engine Specifications:
• Block: Dart Big M Sportsman 4 bolt main 2pc rear main seal
• Bore/Stroke: 4.600” x 4.750”
• Displacement: 632CI
• Crankshaft: Scat 4340 forged internally balanced
• Rods: Scat 4340 forged H beam with ARP 8740 bolts
• Pistons: 2618 Forged +3.4cc Flat Tops
• Compression Ratios: 112cc = 11.3:1 / 118cc = 10.8:1 / 121cc = 10.6:1 (can vary due to deck height/gasket thickness)
• Rings: Plasmamoly
• Camshaft Bearings: Dura-Bond, installed and clocked to OEM position
• Freeze Plugs: Brass, installed and sealed
• Oil Galley Plugs: Installed and sealed

Recommended Components:
• Balancer: Internal balance
• Flexplate/Flywheel: Internal balance
• Head Gasket: .038” or per application

Engine Info:
• Oil: 10W30 Conventional / Non Synthetic for first 3000 miles
• Oil Filter: Wix or K&N per application
• Head Gaskets: .038” or per application

Disclaimer: The recommended components listed are ATK’s recommendations of parts to be used, applications vary and your build may need something different. Contact ATK for a recommendation if you’re not certain about a component to use. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. . ATK reserves the right to substitute parts used in engines if necessary.

The post ATK SP108 Chevy 632CI Short Block +3.4cc Flat Tops appeared first on ATK High Performance Engine.